These are two Gelli transfer prints I recently created depicting the abandoned pool hall off the A6. I recommend using the Gelli Arts printing plates which I sourced from a local art shop. Using Photoshop Elements, I created a montage of two photographs taken from one of my recent photo walks and combined them to form a new composition. I converted the images to a high contrast bitmap and then printed them off using a laser printer.
I added a dark coloured water-based ink layer using black ink (you can also use acrylic paint).
I applied a reasonable quantity of ink to the plate using a roller. I then placed a laser print of the building onto the inked surface and lightly pressed on the back of the paper once flat with the palm of my hand a few times trying not to press too hard to ensure the image transferred to the gel plate.
After a 30 seconds of drying, I then applied a new layer of light blue water based ink this time to the gel plate with a roller over the black ink.
I then applied some fresh cartridge paper to the gel plate and rubbed / burnished the back of the paper covering the whole paper to ensure all parts were rubbed using my the palm of my hand and fingers.
Finally, I removed the paper to reveal the finished print. This method of mono-printing can be a little hit and miss. Technique is the key to getting the results you want.
Have a look at the video below which demonstrates the laser image transfer gel printing technique.
Stockport In Print 